MULTIPRENS 1765 Deep Storable Sliding Winch

Multiprens Sliding Winches are designed to move easily in both directions of Multiprens Sliding Winch Track (4500). The winch will fasten in place once pressure is applied to the webbing. Sliding Winches can also be welded in place for fixed applications. Winches are available in Standard, Low Profile and Deep Storable models.

To insure proper engagement, all winches shall be installed so the user can see the pawl. Additionally, the winch shall be positioned so the pawl drops into the ratchet teeth by gravity. Winches shall never be installed in a position where the user cannot see the pawl engagement, or where they must hold the pawl to engage the ratchet tooth. All winches, except portable and sliding styles, must be welded or bolted to the vehicle structure. Minimum welding requirements are 1/4" fillet weld, 4" long on both sides of the frame and 1/8" penetration. If winches are installed in track, the track shall be attached to the vehicle structural members. The vehicle structure should have equal or greater strength than the winch.

Designed for positioning along sliding track.
Working Load Limit: 2,500 kgs/5,500 lbs
Weight: 4.82 kgs/10.6 lbs